PTHCHD30
Pressure tank with a working volume of 3 000 liters is a cylindrical vessel with dished ends, laid on 3 cradle legs. The vessel is designed for fermenting a partially fermented beer, lagering and tapping of beer or other beverages. The tank is made of stainless steel class AISI304 (DIN 1.4301). Welds of inner container surface are ground to Ra = 0.8. The outer sheathing of the container is all-welded. The pressure tank can be produced in several variants, always tailored to the needs of the customer. The tank can be non-pressurized with a maximum working pressure of 0.5 bar or certified according to PED 2014/68 / EU with a maximum operating pressure of 3 bar. For the Russian Federation, the tank can be certified according to GOST-R. Upon customer request, tanks can be fitted with additional fittings, such as beverage carbonation armature.
Options: |
|
| Pressure design options: | A: 3 bar |
| B: 0.5 bar | |
| Inlet manhole options: | A: In the side of the tank - standard |
| B: On the top side - non-standard | |
| C: Both | |
Standard fitting: (AISI304) |
|
| Oval manhole | 340 * 420 mm |
| Level indicator | DN 20 |
| Vacuum / overpressure valve | DN 25 |
| Inlet and outlet armature | DN 32 |
| Duplex jacketing | lightness 12 mm |
| Polyurethane insulation | lightness 50 mm |
| The insulation surface | ground sheet metal |
| Sanitary armature | DN 32 |
| Blind flange | DN 32, 1 piece |
Standard electronic accessories: |
|
| Solenoid valve DN 25 for ice water inlet | 230V 50 HZ |
| Sensor | NTC |
| Thermostatic regulator | Dixell XR 20D |
Parameters: |
|
| Total height | 1 800 mm |
| Total length | 3 200 mm |
| Total volume | 3 472 l |
| Weight without content | 790 kg |
