LT4
Lager tank with a working volume of 400 liters is a cylindrical vessel with dished ends, laid on 3 adjustable legs (vertical) or on the cradle legs (horizontal). The vessel is designed for fermenting a partially fermented beer, lagering and tapping of beer or other beverages. The tank is made of stainless steel class AISI304 (DIN 1.4301). Welds of inner container surface are ground to Ra = 0.8. The pressure tank can be produced in several variants, always tailored to the needs of the customer.
The tank can be non-pressurized with a maximum working pressure of 0.5 bar or certified according to PED 2014/68 / EU with a maximum operating pressure of 3 bar. For the Russian Federation, the tank can be certified according to GOST-R.
Upon customer request, tanks can be fitted with additional fittings, such as beverage carbonation armature.
Options: |
|
| Position options: | A: Horizontal |
| B: Vertical | |
| Pressure design options: | A: 3 bar |
| B : 0,5 bar | |
| Inlet manhole options: | A: In the side of the tank - standard |
| B: In the top bottom - non-standard | |
| C: Both | |
Standard fitting (AISI304): |
|
| Oval manhole | 340*420 mm |
| Sanitary shower | RTS 25 |
| Level indicator | DN 20 |
| Vacuum / overpressure valve | DN 25 |
| Inlet and outlet armature | DN 25 |
| Sanitary armature | DN 25 |
| Blind flange | DN 25, 1 pcs |
Parameters: |
|
| Total height /length | 1 850 mm |
| Diameter | 600 mm |
| Total volume | 449 l |
| Weight without content | 110 kg |
